MOHAMMAD HOMAYOUNE SADR LAHIDJANI - Amirkabir University of Technology

Special services: Faculty Members Students Graduates

Content

Pepole

Amirkabir University of Technology

Resume Service

MOHAMMAD HOMAYOUNE SADR LAHIDJANI

Professor
Department of Aerospace Engineering
(Emeritus)

Download PDF فارسی

Email:

sadr

aut.ac.ir

Phone:

h-index (Scopus):

18.00

Citations (Scopus):

863

Supervised PhD Theses

Thesis title

Date

Investigation of Aeroelastic Behavior of Flexible High Aspect Ratio Composite Wings undergoing Geometrical Nonlinearity in Incompressible Flow

SHAHROKH SHAMS

2008 Nov

Supervised MSc Theses

Thesis title

Date

low_velocity impact behavior of woven composite

MOHSEN GHIASI

2022 Mar

low velocity impact behavior of sandwich panel

PARSA BAYAT

2021 Oct

Thin plate analysis by using NURBS -Iso Geometric approach

ARMIN DELBARI

2019 Sep

cohesive Zone Model for crack prorogation in composite under cyclic loading

MOHAMMADREZA REZAZADEH

2019 Sep

Forced Vibration analysis of nonlinear systems using nonlinear normal modes

SEYYED MOJTABA MOUSAVI

2018 Jan

English : progressive damage evaluation in a multilayer composites by strength criteries and abaqus software.

SAYEDALI HASHEMI

2017 Jul

Design and analysis of energy harvesting from ambient vibration with piezoelectric material

FARIBA AZARIKAM

2017 Feb

Active control of composite plate vibration with piezoelectric lamina

SADAF MOHAJERIN

2016 Feb

Parameters identification of multilayer composites under general inplanes loading with matrix cracking and delaminations by finite element method

SARA RIZEHVANDI

2016 Feb

interlaminar crack propagation analysis by RXFEM

PAYAM ASHRAFIAN

2016 Jan

Nonlinear normal modes of oscillation by invariant manifold approach

HIWA QAZI

2015 Dec

Low velocity impact damage in fiber metal laminate plates

ALI NOROUZI

2015 Oct

Nonlinear aeroelastic analysis of wind turbine blade

MEYSAM GHASSABI
Other Supervisor: HAMID REZA OVESY

2015 Sep

Investigation on nonlinear modal analysis for aerospace structures

MEYSAM JELVEH

2015 Feb

Shear delamination buckling of fiber metal laminates

MARYAM NIAZI

2014 Oct

Abaqus Implementation of development of failure due to matrix crack in a symmetric laminate under load in complete panel with abaqus software

MASOUD MOSTAFAEI

2014 Feb

Low Velocity Impact Modeling in Delamination Of Laminated Composite Structures

MASOUD KHARAZAN

2013 Oct

Non -Linear Analysis of Laminated Composite Plates with TDQM

HAMED CHOOBDARAN VARNOOSFADERANI

2013 Mar

FEM mesh generation in 3D surfaces containing progressive cracks under mixed mode loading condition

ALI NAZOKKAR
Other Supervisor: ALIREZA JAHANGIRIAN

2012 Mar

The solution of triangular thin plates equations by differential quadrature method

MONA RAMEZANI OLIYAEE

2011 Mar

Aeroelastic Analysis of the High Aspect Ratio Wings by Considering a Nonlinear Unsteady Aerodynamic Model

DAVOOD BADIEI

2010 Nov

: Design optimization of composites using modern algorithms and based on failure criterion

MORTEZA AHMADLOO

2010 Jan

Investigation of important parameters effect in pressure vessel design with FEM to optimize stresses

ZAHRA FALLAH RAMEZANI

2010 Jan

layer optimization for maximum fundamental frequency of thin laminated composite plate

HADI GHASHOCHI-BARGH

2010 Jan

buckling of com posite layers piezoelectric

DOVOOD SHOORJE

2008 May

soulotion of nonlinear aeroelastic equation with integration method

MOHAMMAD MALEKIAN

2008 Mar

ShapecontrolofthinplatewithpiezoelectricActuators

NARGESS SHAERY

2004 Jan

modalcouplingofstructures

MOHAMMAD REZA SOLEIMANI

2003 Dec

structural optimization of the wing box for a light aircraft

ERFAN BEYGI
Other Supervisor: HOSEIN SHAHVERDI

2025 Mar

NOnlinear eueer - bernoullibeam using efficient path following method byFEM

MAHDI GOLSHAHI

2025 Aug

Journal Papers

D. Badiei, M.H. Sadr Lahidjani, Shahrokh Shams, "nonlinear aeroelasticity of H-type vertical axis wind turbine blade", Journal of Wind Engineering and Industrial Aerodynamics, 2024 Feb vol. 246, no. 1, pp.1-12, 2024.

S. Khosravani, M.H. Sadr Lahidjani, Erasmo Carrera, Alfonso Pagani, Rebeca Masia, "multi-scale analysis of thermal conductivity of graphene foam/pdms composites", Mechanics of Advanced Materials and Structures, 2023 Sep vol. 1, no. 1, pp.1-10, 2023.

S. Khosravani, M.H. Sadr Lahidjani, Erasmo Carrera, Alfonso Pagani, Alberto Racionero Sanchez-majano, "Multi-scale analysis of thermoelastic properties of graphene foam/PDMS composites", Computational Materials Science, 2022 Oct vol. 216, no. 2023, pp.1-10, 2022.

M. Niazi, M.H. Sadr Lahidjani, "NUMERICAL SHEAR BUCKLING INVESTIGATION OF GLAIRES WITH INITIAL DELAMINATION", Advances In Materials Science and Engineering, 2022 Sep vol. 2022, no. 1, pp.1-13, 2022.

S. Khosravani, M.H. Sadr Lahidjani, Erasmo Carrera, Alfonso Pagani, "synthesis, experimental testing and multi-scale modeling of graphene foam/epoxy composite", Mechanics of Advanced Materials and Structures, 2022 Apr vol. 0, no. 0, pp.1-11, 2022.

H. Shahverdi, M.M. Navardi, M.H. Sadr Lahidjani, "A Proposed Approach to Simulate Thin Quadrilateral Plates Using Generalized Differential Quadrature Method Based on Kirchhoff-Love Theory", Aut Journal of Mechanical Engineering, 2021 Oct vol. 6, no. 1, pp.15-30, 2021.

M. Meshki, A. Nobari, M.H. Sadr Lahidjani, "A STUDY ON NONLINEAR PARAMETRIC AEROELASTIC ENERGY HARVESTERS UNDER OSCILLATORY AIRFLOW", Journal of Vibration and Control, 2020 Aug vol. 0, no. 0, pp.1-46, 2020.

M. Hajikazemi, M.H. Sadr Lahidjani, H. Hosseini Toudeshky, Bijan Mohammadi, "Thermo-elastic constants of cracked symetric laminate: A refined variational approach", International Journal of Mechanical Sciences, 2014 Aug vol. 1, no. 1, pp.1-1, 2014.

M. Hajikazemi, M.H. Sadr Lahidjani, Ramesh Talreja, "variational analysis of cracked general cross-ply laminates under bending and biaxial extension", International Journal of Damage Mechanics, 2014 Aug vol. 23, no. 7, pp.1-1, 2014.

M. Hajikazemi, H.R. Ovesy, H. Assaee, M.H. Sadr Lahidjani, "Post-buckling finite strip analysis of thick functionally graded plates", Structural Engineering and Mechanics, 2014 May vol. 49, no. 5, pp.569-595, 2014.

M. Hajikazemi, M.H. Sadr Lahidjani, M. Ramezani Oliyaee, "triangular differential quadrature method in bending analysis of triangular symmetric laminated plates", Mechanics of Advanced Materials and Structures, 2014 Apr vol. 1, no. 1, pp.1-1, 2014.

M.H. Sadr Lahidjani, M. Hajikazemi, "stiffness reduction of cracked general symmetric laminates using a variational approach", International Journal of Solids and Structures, 2014 Jan vol. 52, no. 52, pp.1-1, 2014.

M. Hajikazemi, M.H. Sadr Lahidjani, "A variational model for stress analysis in cracked laminates with arbitrary symmetric lay-up under general in-plane loading", International Journal of Solids and Structures, 2013 Oct vol. 51, no. 51, pp.516-529, 2013.

H. Ghashochi Bargh, M.H. Sadr Lahidjani, "PSO algorithm for fundamental frequency optimization of fiber metal laminated panels", Structural Engineering and Mechanics, 2013 Sep vol. 47, no. 5, pp.713-727, 2013.

D. Badiei, M.H. Sadr Lahidjani, S. Shams, "static stall model in aeroelastic analysis of a flexible wing with geometrical nonlinearity", Journal of Aerospace Engineering, 2012 Jul vol. 1, no. 1, pp.1-15, 2012.

D. Badiei, M.H. Sadr Lahidjani, S. Shams, "nonlinear aeroelastic behavior of slender wings considerting a static stall model based on wagner function", Applied Mechanics and Materials, 2012 Jun vol. 186, no. 1, pp.297-304, 2012.

M. Hajikazemi, M.H. Sadr Lahidjani, M. Ramezani Oliyaee, "Through- Thickness Shearing Effects on Geometric Non-Linear Behaviour of Thin and Thick Functionally Graded Plates under Pressure Loads", International Journal of Mechanical and Materials Engineering, 2012 Feb vol. 2, no. 1, pp.1-11, 2012.

S. Shams, M.H. Sadr Lahidjani, Hassan Hadadpoor, "An efficient method for nonlinear aeroelasticity of slender wings", Nonlinear Dynamics, 2012 Jan vol. 67, no. 67, pp.659-681, 2012.

H. Ghashochi Bargh, M.H. Sadr Lahidjani, "Stacking sequence optimization of composite plates for maximum fundamental frequency using particle swarm optimization algorithm", Meccanica, 2011 Nov vol. 47, no. 3, pp.719-730, 2011.

M.H. Sadr Lahidjani, H. Ghashochi Bargh, "Optimization of laminated composite Plates for Maximum fundamental frequency using elitist-genetic algorithm and finite strip method", Journal of Global Optimization, 2011 Sep vol. 11, no. 11, pp.11-11, 2011.

H.R. Ovesy, M.H. Sadr Lahidjani, M. Hajikazemi, Hassan Assaee, "Large deflection behavior of composite laminated plates under end-shortening and normal pressure loading using a semi-energy finite strip method", Key Engineering Materials, 2011 Mar vol. 471-472, no. 0, pp.432-437, 2011.

M. Hajikazemi, H.R. Ovesy, M.H. Sadr Lahidjani, "A semi-energy finite strip method for post-buckling analysis of relatively thick anti-symmetric cross-ply laminates", Key Engineering Materials, 2011 Mar vol. 471-472, no. 0, pp.426-431, 2011.

M.H. Sadr Lahidjani, H. Ghashochi-bargh, "Fundamental frequency optimiziation of laminated cylindrical panels by Elitist-Genetic Algorithm", Key Engineering Materials, 2011 Mar vol. 471-472, no. 0, pp.337-342, 2011.

H. Ghashochi-bargh, M.H. Sadr Lahidjani, "Optimal design by elitist-genetic algorithm for maximum fundamental frequency of fiber metal laminated plates", Key Engineering Materials, 2011 Mar vol. 471-472, no. 0, pp.331-336, 2011.

Alireza Shooshtari, Soheil Razavi, H. Ghashochi-bargh, M.H. Sadr Lahidjani, "Nonlinear free and forced vibration of symmetric laminated panels", Key Engineering Materials, 2011 Mar vol. 471, no. 472, pp.616-621, 2011.

M.H. Sadr Lahidjani, M. Hajikazemi, M. Ramezani Oliyaee, "Large deflection behavior of relatively thick functionally graded plates under pressure loads using higher order shear deformation theory", Key Engineering Materials, 2011 Mar vol. 471-472, no. 0, pp.709-714, 2011.

B. Mohammadi Sangjouey, H. Hosseini Toudeshky, M.H. Sadr Lahidjani, "Failure analysis of laminates by implementation of continuum damage mechanics in layer-wise finite element theory", Structural Engineering and Mechanics, 2009 Nov vol. 33, no. 6, , 2009.

B. Mohammadi Sangjouey, H. Hosseini Toudeshky, M.H. Sadr Lahidjani, "Progressive Damage Analysis of Laminated Composites Using Continuum Damage Mechanics", Journal of Aerospace Science and Technology, 2009 Oct vol. 6, no. 2, , 2009.

B. Mohammadi Sangjouey, H. Hosseini Toudeshky, M.H. Sadr Lahidjani, "Free-Edge Effects Analysis of Angle -Ply Laminates Under Transverse Loading Using Layer -Wise Finite -Element Method With Semi-Analytical Shear Stress Calculation", Proceedings of The Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, 2009 Mar vol. , no. 223, , 2009.

B. Mohammadi Sangjouey, H. Hosseini Toudeshky, M.H. Sadr Lahidjani, "Progressive Damage Analyses of Angle -Ply Laminates Exhibiting Free Edge Effects Using Continuum Damage Mechanics With Layer-Wise Finite Element Method", , 2008 Nov vol. , no. 31, , 2008.

S. Shams, M.H. Sadr Lahidjani, "Nonlinear aeroelastic response of slender wings based on Wagner function", , 2008 Nov vol. , no. 46, , 2008.

B. Mohammadi Sangjouey, H. Hosseini Toudeshky, M.H. Sadr Lahidjani, "Damage Evolution of Laminated Composites Using Continuum Damage Mechanics Incorporate With Interface Element", Key Engineering Materials, 2008 Sep vol. 0, no. 1, , 2008.

B. Mohammadi Sangjouey, H. Hosseini Toudeshky, M.H. Sadr Lahidjani, "Prediction of Inelastic Behavior of Composite Laminates Using Multi-Surface Continuum Damage -Plasticity", , 2008 Jan vol. 0, no. 47, , 2008.

M.H. Sadr Lahidjani, S. Astaraki, S. Seyyedsalehi, "Improving the Neural Network Method for Finite Element Model Updating using Homogenous Distribution of Design Points", Archive of Applied Mechanics, 2007 May vol. , no. 77, , 2007.

Taught Courses

Course title

Description

Headlines

Date

Structure Analysis

4031

Dynamics of Structure

4031

Structure Analysis

4022

Structure Analysis

4021

Dynamics of Structure

4021

Structure Analysis

4012

Advanced Aerospace Structural Analysis

4012